Skip to main content
Contact Us

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
Video Production

5 basic rules using walkie talkies on location

By 11th May 2019December 1st, 2023No Comments
Video Production - Walkie Talkie

using Walkie-Talkies On Location

Often in corporate video production, particularly on multi-camera event coverage, the most effective way to communicate is via walkie talkies. It may seem obvious, but there are a few basic rules to follow to ensure that communication is efficient and clear, this includes specific phrases and structures of how you talk via radio as well as how to act in certain situations…


1 – Identify Yourself

At the biting of the message is the ideal time to announce who is talking, either using your name or your role e.g. “Camera 02” whichever is easiest for the recover to know who’s talking.


2 – Acknowledge You Are Receiving

You have probably heard the phrase “copy that” said over walkie talkies, you must always confirm that you have heard what has been said, even if it means stopping what you are doing for 1 second to dig out your radio if there is no response the speaker will assume you haven’t received the message.


3 – Control Your Volume

It’s sensible to not speak too loud over the radio during shoots for 2 reasons, firstly, it is likely to distort and not be heard on the other end, and secondly, you don’t want to be picked up by any mics that are being used for recording, especially if another cameraman is filming an interview whilst your shouting down the radio! Equally, you should not have your radio on too loud if you are recording.


4 – Clear Words

There’s nothing worse than hearing gibberish on the radio, often there can be crackles or other interference so try and speak your words as clear as possible even if it is an urgent message, speak slightly slower than you would normally, rushing your words won’t help the situation.


5 – The 1 Second Rule

A common mistake made by first-time users is pressing the talk button at the same time they start talking and then releasing the button at the very same time they stop talking. Often this can cut off both the first and last words of the message, which causes confusion! Be sure to hold the button down for 1 second before you start talking and give another second in the end after you have finished talking.

If you follow these simple rules you will have much easier communication amongst your crew members. Note that some crews may have slightly different phrases depending on who you are working for but its not hard to adapt if you already know these basic rules.

For more info check out walkie talkie phrases or hope over to our video services page.


Close Menu

Dragonfly, a video production company in London.